Simulated workplaceCAQA Powergen Station is a fictional business created by CAQA for training and assessment. It is not a real company and no person, client or record here is real.About this simulation
UEPCAQA PowergenSimulated workplace
Simulated workplace
Communications

Notice board

What the business is telling its staff this month.

Safety

Isolation lists must include auxiliary systems

A permit walk down on 1 September found that the lubrication oil pump for boiler feed pump 2B was not on the isolation list. The fitter caught it before work started. Every isolator must list every energy source including auxiliaries, and every recipient must walk the isolation before accepting the permit. The isolation list template has been updated.

2 September 2026

Operations

GT2 trip investigation and combustion inspection

GT2 tripped on 5 September on high exhaust temperature spread and was returned to service the same afternoon. The investigation is open and a combustion inspection is proposed for November. Controllers must watch the can 7 thermocouple trend each shift and log any spread above 50 degrees Celsius. Questions to the Operations Manager.

7 September 2026

Event

October outage: contractor induction sessions

The GT1 and steam turbine outage starts on 5 October with around 90 contractors on site. Induction sessions run every weekday from 22 September in the training room. Contractors must declare chemicals for the register and must not enter plant areas without checking the permit board. Supervisors must confirm inductions in the authorisation records before day one.

10 September 2026

Compliance

Dam safety: gallery drain D-14 under watch

Gallery drain D-14 at the Mitta Ranges dam has increased flow over the past two months. It is below the alert level and the dam safety engineer has been informed. Operators must read D-14 weekly and report any further increase on the day. Two people must attend every gallery inspection.

11 September 2026

People

Site safety committee and first response team drill

The site safety committee meets on 18 September and the first response team drill follows on 25 September at the fire training ground. Panel C members are rostered for the drill. Health and safety representatives should send agenda items to the HSE and Quality Manager by 16 September. All welcome to observe the drill from the assembly area.

15 September 2026